Now led strips strips have entered every household, but most of people are not very understanding about the construction and installation of led strips strips. I organize a number of detailed steps to install the led strips strips to give you reference, so that you can install by yourself.
Led Strips Strips Installation
1.Indoor installation: for interior decoration, the installation of led strips strips is very simple because it do not have to withstand wind and rain. For example of led strips strips produced by Hanron Lighting Co., Ltd. There are self-adhesive 3M double-sided adhesive on the back of each led strips strips
. While installation, you can directly peeled 3M double-sided adhesive surface of the stickers, and then fixed the light bar in the install place, and at last just press it by hand. As for some places which is too long or need a corner, you can cut it for use. Because led strips strips is a group of parallel connection circuit structure, every 3 LED can be cut off alone. After cutting the led strips strips, you can use it in anyplace you like.
2.Outdoor: for outdoor installation, led light strips will withstand wind and rain. If use 3M glue to fix, the adhesion of 3M will reduce after a long time which result in led strips strips shed. Outdoor installation often use card slot fixed way and the place need to cut and connect. The method is the same to indoor installation. Besides, you just need another waterproof glue to consolidate the waterproof effect on connection point.
Led Light Strips
3.The power connection method: the general voltage of led strips strips is about 12V DC, therefore the switching power supply is needed. The size of the power is set according to the the power and connection length of led strips strips. If you do not want each led strips strips with a power supply to control, you can buy a relatively large switching power supply as the total power, and then all the led strips with input power is connected in parallel(wire size can be extended if it is not enough) and achieve power supply by the total switching power. The advantage is that you can realize centralized control, but the inconvenient is that it can not achieve lighting effects and switch control of a single led strips strips. You can decide the methods according to you own needs.
4.The controller connection: LED marquee and RGB full color light need to use the controller to achieve the effect of change, and the control distance of each controller is not the same. In general, the simple controller control distance is 10 to 15 meters, the control distance of the remote control is 15 to 20 meters, the longest control distance can be 30 meters. If the connection distance of led strips strips is long, and the controller can not control such a long light belt, then you need to use the power amplifier to tap.